Best Blogging Software

How to Produce Music With Synthesizers and Virtual Instruments – Cubase 4 and VST Plugins

Mon, 23 Aug 2010 06:49:32 +0000

This is a guide to basic sound synthesis which will help you in creating music with software and virtual instruments like Cubase and Fruity Loops. The basic sound that you hear in the patches is produced by the oscillators, and is then fed through the synthesizers signal path. If you set oscillation to a very low pitch, you’ll end up with gaps because the wave form is unceasingly dependent on the speed pitch of the note. And so the different sounds are produced by the shape of the waveform, which is the product of oscillation. Here’re the standard wave form. For a sharp biting type sound, you need the saw wave. Its named as this because its shape is identical to those on a saw blade To get a soft mild tone then you’ll want the Sine Wave, which’s shaped like a horizontal S; it has a smooth up and down shape to it. A specified colour of noise will produce noise even though it is not truly a wave-form To get that sound that simulates a hollow reed you need the square-wave. This’s distinguishable by its near perfect square out-look. A variance to the square wave is the pulse-wave, although its merely half as wide. It has the interesting ability to have a modulated width. Perhaps you’ve heard this as being related to as the Pulse Width Modulation. To find a glad medium between the saw wave and sine wave you would need the triangle-wave, which’s the shape of a triangle. Most often a synthesizer has 2-3 oscillators. Being as that is the case, you can do a couple of fascinating stuff by mixing the waveforms together. Plus you can tune them so they’re different from one another. It can be tuned in semitones, octaves or in cents. A swirling untuned sound is produced by many oscillators which are cents apart from one another. Cents is a hundredth of a semi-tone. There is an oscillator recognise as a low frequency oscillator. Its frequencies are undetectable unless you physically tune it into a standard hearing range. Its job is to tone the pitch of the oscillator or the filter frequency. The start and stop of the waveform is quite evident because the LFOs are like the oscillators in that they all the same use regular wave forms. When utilized the right way for instance the sine-wave allows you to hear an increasing or decreasing sound of the wave shape. Animation and moving texture will be the end result for your synthesizer sound if done properly. You can harness the full power of an actual synth stack using VST plugins and Cubase. Go ahead. Ride volume on multiple tracks simultaneously. Explore sounds and effects with VST plugins. Mute,solo and record tracks with the push of a button. Open and tweak virtual insutrments and effects plugins easily. Music creation can’t get any easier than this.

If you enjoy producing and recording music, get your hands on VSTPlatinum VST plugins pack Discover how to you create music easily and quickly from home with over 1700 virtual instruments and effects These synth instruments and VST plugins work for Cubase 4, 3, SX, LE, Fruity Loops and other major music creation software. Find out more at: http://www.VSTPlatinum.com
Article Source

Why so Many Bloggers Give Up Quickly

Sun, 22 Aug 2010 16:41:55 +0000

Creating a blog is an exciting experience. When you first start blogging it feels fun and when you start getting traffic blogging feels really fun. A lot of people go into blogging expecting to be the next Wil Wheaton or Dooce or Perez Hilton. These same people often scrap their blogs for other projects within a month or two. Why is that? Technorati says that there are millions of blogs in the system and that thousands of new blogs are created every day. Why are so many of these blogs abandoned?

Patience is a Virtue!

For some reason people think that a blog will see overnight success. Guess what—it simply is not true! It takes quite a lot of time to build up a blog’s following and gain some notoriety within the blogosphere. Even Heather Armstrong (the author of the popular Dooce blog) and Jason Kottke started out small. No blogger has ever been popular immediately. They have the fame they have now because they stuck with blogging and built an audience from scratch. It can take months or even years to build up an audience and when the attention isn’t immediate, most bloggers will give up.

Thinking too Small

Today the single most popular piece of advice given to new bloggers is to “choose a niche.” While it is certainly helpful for some bloggers to center their sites around a certain idea or notion, these same bloggers do not often take the time to figure out which niche best lends itself to blogging. The truth is that any niche can be blogged about as long as the blogger thinks broadly enough. Unfortunately most novice bloggers pigeonhole themselves from the beginning. Instead of focusing simply on marine biology, the blogger might focus solely on a single type of fish or location. Eventually it becomes difficult to think of blog posts and the blog naturally runs out of steam.

Are you easily bored?

When choosing a niche or a blogging subject, it is a good idea to choose something that you are passionate about. Most bloggers try to choose subjects (or niches) that are already popular or that could end up earning them money. The problem with this is that these markets are already oversaturated so the competition is worse. The other problem is that the blogger might not enjoy his/her subject matter and get bored with it quickly. Choose a subject that you can (or already do) talk about every day without tiring of it. Most bloggers choose based on numbers, not emotions.

All of these things can lead to the abandoning of a blog. The simple truth is that building a popular blog takes time focus and quite a lot of energy and effort. There is no way to simply coast into a very popular blog and the blogging fame that comes with it. Take your time and build slowly. You’ll be better off in the long run!

For more information on blogging, visit http://www.micro-blogger.co.uk and http://www.micro-blogger.org.

Article Source

Some Powerful Tips for Blog Online Marketing to Build Successful Blogs & Earn Money on the Internet!

Sat, 21 Aug 2010 22:25:19 +0000

Now, I am going to give you 9 powerful tips you must take into your action seriously for your blog online marketing. With those tips, you can build highly successful and profitable blog online and earn money on the internet. All you have to do is to take those tips in your action and marketing plan seriously.

My investigations show that blog is one of the most popular and effective ways to earn money on the internet. Now, most of people have their own blog online. Also, most internet entrepreneurs use blog as their internet marketing tools to advertise and sell their products or services.

Actually, blog online marketing is not all that hard if you know what you are doing. However, if this is your very first blog and you are wondering how to get readers For more helps visit on go on www.blog-and-ping.com. First let me just say that marketing your blog is going to require patience, and being consistent.

Here are some great tips to use when trying to get your blog out there and get new readers. Youâ€™ll discover workable tips and secrets of how to build successful blog and earn money with your blog.

1) The first key for your successful in blog online marketing is to update your blog frequently. We can not put enough emphasis on this tip. If you tell your readers that you are going to update your blog daily, then do it. If you tell them that you will be writing in your blog weekly, donâ€™t let them down. Your readers are what make your blog successful. You may not realize this in the beginning, and you will have few readers in the beginning as well, but you will eventually build a readership base and have people checking out your blog regularly. Maybe you do not plan on telling your readers how often you will update your blog. That is ok too. However, think about this, if you were reading a blog on a weekly basis, and you expected to see the blog that you like to read updated at least once a week, you would be very disappointed to find out that it was not. Sure, things happen that might prevent you from updating, and that is expected, and excused, but week after week can hurt you and cause you to lose readers.

2) You are going to want to be sure that all of your posts are formatted. Doing so will leave out any confusion for the search engines and you will have everything nice and neat and all organized. The label tags are there for a reason when you are dealing with blogs. So using them and not leaving them out is a great idea.

3) I would recommend you to ensure that your blog has the track back feature. Let me tell you why. When you have the track back feature on your blog, you are allowing other people to link back to your blog. Maybe someone has a post to post on their blog that is relevant to one of yours. They can use the talkback to your post, and send their readers to your blog so that they know what they are referring to. Another good thing to remember is that if someone gives you a track back, it is a courtesy to return that to their blog if at all possible.

4) Having a Google account and submitting a sitemap is almost a must when you are blog online marketing. Doing so will allow Google to know how often you are updating your blog and they will automatically know of any changes that you have made to it as well. This will let Google get those new pages indexed faster and get them into search results much quicker than if you did not have the sitemap. There is a certain way you have to do the sitemap for Google, and they can explain that to you. Just know this is an important step to blog online marketing.

5) Exchanging links with authority blogs and websites that are in your same market is another great way to get the word out about your blog. The authority sites are going to have a higher page rank, and will also be listed high in Googleâ€™s search results. So do some searches and check those out and see if they are up to exchanging links. If they are not, you could always just add those into your blogrolls. You do not need permission to do that if they are not into linking. However, in the world of blogs, most blog owners are thankful for all links, and are willing to return the favour.

6) Tracking is another part of blog marketing that is so very important. You want to be able to track your visitors and clickers to know where they are coming from. You want to be able to tell what keywords they searched on to find your blog and where they did their searching. Doing so will help take out all of the guess work when it comes to blog marketing. You will know what keywords are working, and which are not.

7) Allowing RSS feeds from your blog is also another great blog online marketing tool. You are going to find that when you allow RSS feeds, your blog is going to end up all over the internet with a link back to it and that is a good thing. This is a wonderful way to get links to your blog with little or no effort. People that subscribe to your blogâ€™s RSS feeds are able to then post your blog posts on their sites or blogs. This in return gives you a link on their site or page that they have you on.

While you are working on your readership base, and trying to gain readers, you are going to find that commenting on blogs that are relevant to yours will surely help. Find a blog that is on the same topic to yours, or go on www.profit-pulling-toolbars.com. You can also make a track back with your blog postings to comment on your own blog. Doing so will probably more than likely give someone else the urge to track back to your blog? This will be good for it as well. Commenting on blogs that get many comments will make your blog seen by those interested in that market. You will gain traffic and readers that way, and it is easy as well as free.

9) Learn and apply SEO to your blogs. SEO is search engine optimization. You are going to find that if you want your blog to go anywhere, you need SEO, and you need to know how to use it to the advantage of your blog. Just like a website, a blog will be better off optimized.

Final thoughts, blog online marketing is only as hard as you make it. Use these powerful tips and get your blog out there and seen today! about blog online marketing to start & grow your highly profitable and successful home based internet marketing business with your blog today! You’ll discover great tips, workable & proven techniques, top secrets and steps-by-steps of how to get your blog been #1 ranking in major search engines, drive a ton of relevancy traffic and earn money on the internet with your blogs. Also, you will save a lot of your time & money to learn by yourself.

www.atoz-about-rss.com www.your-own-blog.com
Article Source

Review of VSTPlatinum – The Ultimate 1700 VST Plugins Sound Effects Package

Sat, 21 Aug 2010 04:56:14 +0000

Many music lovers want to go beyond the pure pleasure of just listening to music. There are people out there like myself that believe that way deep down inside them, they have the creative juices it takes to create and produce their own chart topping hits. The problem is most of those people like me just do not have the pocket books to accommodate the cost of expensive synths and a professional studio setup. Having said all this you can imagine my joy when I stumbled across a system that would allow me to make the music I have always dreamed about. Of course, there are professional types on the market with the price tags of thousands of dollars. However, the beauty of this system though is that it is professional quality, priced at a reasonable level for beginners to start out. This is a review of “VSTPlatinum”. The package promises a “push-button” and easy solution to start making professional music. My first concern was how much studio experience would I need? Within a matter of seconds, I got my answer. Absolutely none! Now I knew that within days I would be on my way to making my own music. Surely, it would be just the basics but that was ok, it’s a start. I was just thankful to find something outside of the professional VSTs price range. As excited as I was, I was still a little skeptical. After all what credibility was there to this proposal? As I read about Greg Hoffman and his credentials, I knew he wasn’t going to risk his character on selling something inferior. After all, he’s a reputable sound engineer and after being in the business for 25 years there’s little doubt that he doesn’t know what he’s talking about. I was even further impressed when I learned that Greg had worked with renowned named companies such as Sony BMG Music. I mean to work for the big guns you had to know your stuff. By now, I’m convinced that the VST platinum is soon going to be mine, now I wanted to hear about all that I was going to be able to do with it. With over 1700 plugins and 4000 sound effects, this is definitely an easy headstart for home studio enthusiasts. No longer do you have to mess with complicated hardware or overprice synthesizers. VST Platinum promise that I would able to create great sounding music and sound samples easily and quickly with software based systems. It wasn’t also likely that I would outgrow the system in the near future as it has over 1700 VST plugins of superior plugins and 4000 sound effects. At the price Greg is offering, I think it is a “no-brainer”. I went ahead and placed my order and I couldn’t wait to get my VST platinum DVD in the mail because I knew once I didn’t it wasn’t going to take days of reading manuals and constant learning. I would be at it within no time at all. By not having all that extensive learning, hardware tweaking and jargon to follow, it meant more time for what I loved to do most – and that’s making music. Now with state of the art VSTs like those offered in VST Platinum – look out world here I come!

You can find out more about VSTPlatinum at : www.VSTPlatinum.com Grab over 1700 premium vst plugins at the official site now.
Article Source

10 Blog Traffic Tips

Fri, 20 Aug 2010 12:00:31 +0000

Maybe a few days later you received a few hits when you told your sister, father, girlfriend andbest friend about your new blog but that”s about as far you went when it comes to finding readers.Here are the top 10 techniques new bloggers can use to find readers. These are tips specifically for new bloggers, those people who have next-to-no audience at themoment and want to get the ball rolling. It helps if you work on this list from top to bottom as each technique builds on the previous step to help you create momentum. Eventually once you establish enough momentum you gain what is called “traction”, which is a large enough audience base (about 500 readers a day is good) that you no longer have to work too hard on finding new readers. Instead your current loyal readers do the work for you through word of mouth.Top 10 Tips 10. Write at least five major “pillar” articles. A pillar article is usually a tutorial style article aimed toteach your audience something. Generally they are longer than 500 words and have lots of very practical tips or advice. This article you are currently reading could be considered a pillar article since it is very practical and a good “how-to” lesson. This style of article has long term appeal, stays current (it isn”t news or time dependent) and offers real value and insight. The more pillars you have on your blog the better. 9. Write one new blog post per day minimum. Not every post has to be a pillar, but you should work on getting those five pillars done at the sametime as you keep your blog fresh with a daily news or short article style post. The important thing here is to demonstrate to first time visitors that your blog is updated all the time so they feel that if they come back tomorrow they will likely find something new. This causes them to bookmark your site or subscribe to your blog feed. You don”t have to produceone post per day all the time but it is important you do when your blog is brand new. Once you get traction you still need to keep the fresh content coming but your loyal audience will be more forgiving if you slow down to a few per week instead. The first few months are critical sothe more content you can produce at this time the better. 8. Use a proper domain name. If you are serious about blogging be serious about what you call your blog. In order for people to easily spread the word about your blog you need an easily rememberable domain name. People often talk about blogs they like when they are speaking to friends in the real world (that”s the offline world, you remember that place right?) so you need to make it easy for themto spread the word and pass on your URL. Try and get a .com if you can and focus on small easy to remember domains rather than worry about having the correct keywords (of course if you can get great keywords and easy to rememberthen you”ve done a good job!). 7. Start commenting on other blogs. Once you have your pillar articles and your daily fresh smallerarticles your blog is ready to be exposed to the world. One of the best ways to find the right type ofreader for your blog is to comment on other people”s blogs. You should aim to comment on blogs focused on a similar niche topic to yours since the readersthere will be more likely to be interested in your blog. Most blog commenting systems allow you to have your name/title linked to your blog when you leave a comment. This is how people find your blog. If you are a prolific commentor and always have something valuable to say then people will be interested to read more of your work and hence click through to visit your blog. 6. Trackback and link to other blogs in your blog posts. A trackback is sort of like a blog conversation. When you write a new article to your blog and it links or references another blogger”s article you can do a trackback to their entry. What this does is leave a truncated summary of your blog post on their blog entry – it”s sort of likeyour blog telling someone else”s blog that you wrote an article mentioning them. Trackbacks often appear like comments. This is a good technique because like leaving comments a trackback leaves a link from another blog back to yours for readers to follow, but it also does something very important – it gets the attention of another blogger. The other blogger will come and read your post eager to see what you wrote about them. They may then become a loyal reader of yours or at least monitor you and if you are lucky some time down the road they may do a post linking to your blog bringing in more new readers. 5. Encourage comments on your own blog. One of the most powerful ways to convince someoneto become a loyal reader is to show there are other loyal readers already following your work. Ifthey see people commenting on your blog then they infer that your content must be good since you have readers so they should stick around and see what all the fuss is about. To encourage comments you can simply pose a question in a blog post. Be sure to always respond to comments as well so you can keep the conversation going. 4. Submit your latest pillar article to a blog carnival. A blog carnival is a post in a blog that summarizes a collection of articles from many different blogs on a specific topic. The idea is to collect some of the best content on a topic in a given week. Often many other blogs link back to a carnival host and as such the people that have articles featured in the carnival enjoy a spike in new readers. To find the right blog carnival for your blog, do a search at http://blogcarnival.com/. 3. Submit your blog to blogtopsites.com. To be honest this tip is not going to bring in a flood of new readers but it”s so easy to do and only takes five minutes so it”s worth the effort. Go to Blog Top Sites, find the appropriate category for your blog and submit it. You have to copy and paste a couple of lines of code on to your blog so you can rank and then sit back and watch the traffic come in. You will probably only get 1-10 incoming readers per day withthis technique but over time it can build up as you climb the rankings. It all helps! 2. Submit your articles to ArticleBase.com. This is another tip that doesn”t bring in hundreds of new visitors immediately (although it can if you keep doing it) but it”s worthwhile because you simply leverage what you already have – your pillar articles. Once a week or so take one of your pillar articles and submit it to ArticleBase.com. Your article then becomes available to other people who can republish your article on their website or in their newsletter. How you benefit is through what is called your “Resource Box”. You create your own resource box which is like a signature file where you include one to two sentences and link back to your website (or blog in this case). Anyone who publishes your article has to include your resource box so you get incoming links. If someone with a large newsletter publishes your article you can get a lot of new readers at once. 1. Write more pillar articles. Everything you do above will help you to find blog readers however all of the techniques I”ve listed only work when you have strong pillars in place. Without them if you do everything above you may bring in readers but they won”t stay or bother to come back. Aim for one solid pillar article per week and by the end of the year you will have a database of over 50 fantastic feature articles that will work hard for you to bring in more and more readers. Warmly,Gary Neame ABOUT THE AUTHOR: Internet marketer Gary Neame specializes in teaching real people how to successfully start, build, and grow their own profitable online businesses on small budgets. To get instant access to the step-by-step strategies, tools, and resources. visit:All About Internet Marketing Tips
Article Source

Advanced Music Making Techniques – Sound Envelopes For Cubase Plugins and Synths

Thu, 19 Aug 2010 16:59:52 +0000

Lets assume that you start off at full blast and you stay there, then you let go of the key and your patch disappears. Implying no envelope involved. They’re the important element for sound articulation. It’s as a result of the envelopes that you could be creative and express dynamic sounds via your synthesizer. You’ll study about them briefly, although they’re rather tough to understand. Think of the average envelope being as 4 primary entities. Entity 1 : If you require good string sounds then do the following. Set it moderately high where the sound will gradually decline. If you set to nothing then the sound would immediately be at full tilt. So you want to attack meaning the sound is rising up to its maximum level. Entity 2 : When the attack brings the sound up and stays at the level how long it stays there is known as the decay. If you set it at max. level then it will stay there permanently which means the sustain stage is of no value. Entity three : Once the decay stage has ended it’ll be at the sustain level where it stays. In various cases reckoning on your synthesiser you would have a dedicated sustain time setting, which means it’ll decay the sustain stage after an adjusted time period. Entity four : The sustain level takes a period of time to decline to silence. This is the release, and its nearly like reverb at the sound ending. If you want it to be instant then set the release level to nothing. Get a picture in your head of the envelopes then with practising the programming of the envelopes you would master it. Think of every entity on graph paper where you are dedicating higher to lower points as it goes through the various entities and the sound changes. Picture the sound increasing through the attack, decreasing through the decay, remaining in the determined level of the sustain, then eventually it disappears through the release when you let go. To articulate the filter it wants a filter envelope. You should be able to see a dedicated knob for the filter frequency. Youre going to programme the filter envelope simply as you will whatsoever average envelope after you turn down the normal cut off filter, and turn the filter envelope cut-off higher. It’ll take a little getting used to. To hear something impressive turn the sustain on the filter envelope off, forget about the release and attack. Then make the decay short and turn up the release. What youre doing here is using the envelope to cut-off the frequency, thus youre not changing the volume. Say you increase the attack on the filter envelope, you’ll create brass sounds. Now you can use all these techniques with VST plugins. But how easy are VST plugins? Simply stated, it is a drop-dead easy-to-use method to start churning out music tracks so YOU can start rolling out these beats, loops and samples effortlessly even if you’re doing them for the first time. It is as easy as PUSH-BUTTON. Just run and vst audio software and load the plugins and effects and it’ll all come together and work for you. No matter if you’re a beginner in music software production or a seasoned pro, you will be delighted with the arsenal of effects and plugins available to you. You no longer have to fiddle with complex synthesizers or software settings. All the hard work has already been done for you!

If you enjoy producing and recording music, get your hands on VSTPlatinum VST plugins pack Discover how to you create music easily and quickly from home with over 1700 cubase vst plugin and effects These dj virtual effects and VST plugins work for Cubase 4, 3, SX, LE, Fruity Loops and other major music creation software. Find out more at: http://www.VSTPlatinum.com
Article Source

Moving Your WordPress Blog

Wed, 18 Aug 2010 21:19:25 +0000

Moving a blog can make it unreachable for 24 – 72 hours, unless the new domain name has fully propagated around the Internet. It is just the way it is and WordPress doesn’t have anything to do with such limitation. Moving is best done when you have the time or have planned ahead.
Moving Towards a New Domain Name
The first thing to do is create a database back-up. The entire WordPress installation needs to be downloaded with no exceptions. This is not the time to tidy up your install or to upgrade/change anything. That would have to wait after the blog has been moved and is shown to be working. Your computer should now have these items: one or more database backups plus all your wpfiles, folders and images directories. The backups should be copied again to somewhere safe on your machine so that the next stage can be done on a copy.
Alterations are needed to be made. The details of your new mysql connection have to be changed by opening the file “wp-config.php” on your WordPress install. The file: SCR 1.0.002 Freeware Edition (13KB) should be downloaded to search and replace your website URL with your Xampp url. This is because your blog address inside the database has to be changed. Database files can be very large, thus opening them can be excruciatingly slow. It could even crash your machine. By replacing the old address with your new address, the URLs within your site will still work.
Moving hosts will mean changes in your passwords. You can double check your new passwords for your mysql connection as well as other passwords that you have in use. After which, it is now time to upload all your files to your new web space and restore your database. From the website cpanel, select the database you are using. You should still need to look inside the “wp – options” table to check that the values in “site – url” and “home” are correct. Clear your cache and cookies before checking your new site.
It is possible that you will get a blank page when looking at your blog right after moving. In this case, the themes should be checked. A faulty theme file causes a blank page. You can try changing themes or uploading a new theme then changing to it. Should this step not help, you should check whether all the WordPress files are present and are of the correct size. You can use your ftp client to download a new set of WordPress files, if needed.
There may be instances where you would need to move WordPress around within your server. WordPress is flexible enough to handle this situation. Moving WordPress from one server to another is also possible.
Moving Within
WordPress files can be moved from one location on your server to another. Start by creating the new location using any of these methods: create the new directory when you will be moving your WordPress core files to a new directory, or move the WordPress to your root directory by making sure all index, php, .htaccess and other files that might be copied over are backed-up and/or moved. This will then make the root directory ready for the new WordPress files. It is crucial that you set the URL locations before you move the file.
When done, test your site to confirm that it works right. Make sure that you let people know the new address when the change involves a new address to your blog. Consider adding some redirection instructions in your .htaccess file to serve as a guide to visitors towards the new location.
Handling Redirects after Moving a WordPress Blog
Concerns should not be limited to the moving of the actual WordPress program files but also on finding a way to redirect visitors that may be following outdated links to an old content. It is possible that redirects can mess up RSS feeds and search engine results thus an ideal redirect option that preserves both past and current search results is the key. After moving your WordPress blog, look into how 301 redirects can be properly handled.
A suggested way goes like this: open your .htaccess file in the directory that houses your newly moved WordPress file and edit in either your host’s file manager interface or by downloading to your local machine. Insert a line at the top that reads: redirect301/blog/http://www.yoursite.com/. You have to make sure to insert the opening and trailing / at the end of the destination path. Save your .htaccess file. Reupload it if you’re editing on your local machine rather than on the server. Load your old WordPress URL to make this work.
Moving Several Posts from One Blog to Another
When you decide to move over all your WordPress related posts from another blog, the task is basically to extract a few posts and their comments and to insert them into the database of the new blog. This can be accomplished by following these steps: click on the wp-posts table name in the left panel when you are in the proper database. It should be noticed that other tables might have a different prefix. Click browse on the top in the next panel. Select the checkbox at the beginning of the rows that you want to extract or export. Select “Export” at the bottom of the rows where it says “with selected”. Deselect structure on the next panel, leave selected Data, check Save As file, then Go. You will then get a prefix – posts.sqlfile.
Open the file in your chosen text editor such as Notepad. Change the wp-part everywhere to target_ -, depending on the prefix of the tables where you want to move the post using Search/Research. You are ready to go if you move the post to a new, empty database. However, if the target blog has posts in the database, there is some more work to do. You have to check in the database what the ID number of your last post is in the target blog. You should also go back to the .sqlfile and take a look at the first line below Dumping data for table…
Moving a WordPress Blog to Your Own WordPress Installation
WordPress is a platform you install on your own/hosted server and maintain the installation yourself. However, attempting to make the move should only be done if you’re comfortable with ftp, basic work in the UNIX shell, basic SQL and a little bit of general hacking. Expertise is not really required but possessing the basic skills and the willingness to give it a go are.
The first thing to do is to install WordPress and get a hosting service. Choose one that does an automatic install of WordPress to do away with fiddling. Of course, you would need http://mysql.php, some form of ftp access and a shell account. The challenge lies on setting up your blog on a new place while finding the theme and the plugins you want. The themes on http://WordPress.com normally have links to places you can download them from.

http://www.theinternetone.net
Article Source